Special adhesives for multiple markets
WATERPROOFING ADHESIVES
TELCOFOAM 575
Contact adhesive for the overlaping and support process in the bonding of waterproofing foils such as EPDM, butyl- rubber, etc. to cement, hormigon, metals and others.
It has an excellent initial tack and high solvents evaporation, which allows fast working processes.
- The high flexibility of the adhesive film achieves joints that are barely noticeable.
- Holds a large quantity of materials in their position while working with them.
- The long open time of the adhesive allows it to adapt to almost any working rhythm.
SOUNDPROOFING ADHESIVES
OBRADOR 543
Contact adhesive specially developed for bonding high-pressure laminates, wood, polyurethane foam, certain rubbers, natural leather, textile materials, cork, cardboard, etc. in general any type of material, except PVC and other types of flexible plastics.
- It is characterized by high initial cohesion and high resistance temperature.
- It is characterized by high initial cohesion and high resistance temperature.
- It has great versatility, providing excellent adhesion on a wide variety of substrates and an excellent setting speed.
- It has great versatility, providing excellent adhesion on a wide variety of substrates and an excellent setting speed.
ADHESIVES FOR CAR ROOF RESTORATION
OBRADOR 727
- High temperature resistant adhesive, su.itable for the repair of car roofs.
- VISCOSITY of the product suitable for easy application and high performance.
- The high initial tack, which speeds up the working process, is achieved by the rapid evaporation of the solvents.
- Evaporation of its solvents and the high cohesion of the film.
ANTI-PUNCTURE ADHESIVES (BIKES)
OBRATEX 5081
- Faster and more effective.
- Contains ammonia.
- Red colour in order to identify punctures.
- Designed for Tubeless and Tubeless ready.
- Prevents air leaks on Tubeless tyres.
OBRATEX 5080
- DOES NOT contains AMMONIA, reducing wear and tear on the chambers.
- Red colour in order to identify punctures.
- Renew every 3-6 months depending on use and conditions.
- Developed for Tubeless tyres and air chambers.
- No need in renewing too often (once in a few months). Does not dry out.
- DOES NOT contains AMMONIA, reducing wear and tear on the chambers.
- Yellow colour in order to identify punctures.
- Developed for Tubeless tyres and inner tubes with technical foam.
MONOCOMPONENT PU ADHESIVES(1K)
POLIURETANO PU-LS
- Monocomponent adhesive, for glued woods, plastics, metals, varnished surfaces, etc.
- 100% solids product.
- The bonding line has very good mechanical resistance at high temperatures and moisture conditions.
- Its good final resistance to the outdoors can be used for outside woodwork bonding.
POLIURETANO PU-LS DS
- Specially developed for the agglomeration of wood shavings and sawdust, rubber granules, etc.
INSTANT ADHESIVES (CYANOACRYLATES)
INSTANT ADHESIVES
- Instant adhesive.
- Instant adhesive gel.
- Instant adhesive forte plus.
- Ocian flexible.
Packs of 20 and 50 g.
ADDITIVES
- Instant accelerator adhesive.
STICK ADHESIVES (HOT-MELTS)
OBRAMELT 120
High-performance universal adhesive for bonding all types of materials such as plastics, wood, ceramics and challenging materials.
Available in sticks of 100, 200 and 300 mm length and 11.4 +/- 0.4 diameter.
OBRAMELT 110
Hot-melt adhesive for adhesion of paper, cardboard and plastics. Packed in boxes of 10 Kg.
SEALANT ADHESIVES - SCREW FIXERS
Monocomponent liquid resin, which, when polymerized →completely fills and seals the gaps between metal parts and fixes them. They are available in various degrees of mechanical resistance to fix and seal threaded elements or to retain smooth cylindrical elements.
| REFERENCE | OBRADOR T-90 | OBRADOR T-150 |
|---|---|---|
| BASE | ACRILIC | ACRILIC |
| COLOUR | BLUE | RED |
| VISCOSITY cPs | 750 | 750 |
| SHEAR STRENGTH | MEDIUM | HIGH |
| 80% FINAL STRENGTH | 1 HOUR | 1 HOUR |
| STABILITY | 1 YEAR | 1 YEAR |
ADHESIVES FOR SYNTHETIC SURFACES
TELCOMUL 9043
Special adhesive for gluing of PVC flexible coatings in roll or tiles, supported PVC or carpets on cement mortar base, terrazzo or wood, etc.
It is characterized by easy applicability and high strength on bonded substrates.
Instructions for use: Apply the adhesive on the base using a toothed trowel, approximately 1 mm deep with continuous teeth 1 mm wide. Allow to dry for 15 to 20 min. Lay the floor with sufficient pressure to ensure good contact between the two surfaces.
efectuando una presión suficiente a fin de obligar a un
buen contacto entre ambas superficies
ANTI-GRAFFITI COATINGS
NATURCOAT SC 20
This anti-graffiti coating is a reversible protection system against graffiti and airborne contamination (e.g. CO2 and soot) or buildings and structures both inddors and outdoors.
Unwanted graffiti is a serious problem that causes millions of euros in clean up damages and in many cases , some distruction caused by graffiti is irreversible destroying multiple structures and facades.
It is therefore recommended to protect your property from day one → with our NATURCOAT SC 20, so these scnearios can be avoided.
It is an ECOLOGICAL product, completely harmless to humans, animal life and the environment. It has a clear colour that it is practically INVISIBLE.
The perfect protection for the likes of public buildings, transportation, private property and historical monuments.
PARQUET WOOD FLOORING
Mono-component adhesives range and of unilateral application based on synthetics resins on a water base.
Recommended especially for inlaid parquet and wood planks.
Thixotropic adhesive that avoids unnecessary spreading.
Perfectly flexible to allow wood movements.
High content of solids to fill holes and prevent shrinkage.
| PRODUCT | COLA PARQUET A-304 | COLA PARQUET A-304 B/V |
|---|---|---|
| BASE | DISPERSION OF SYNTHETIC RESINS | DISPERSION OF SYNTHETIC RESINS |
| TYPE | UNILATERAL | UNILATERAL |
| VISCOSITY | 27.000 cPs | 15.000 cPs |
| DENSITY | 1.4 gr/cm3 | 1.4 gr/cm3 |
| pH | 5 | 5 |
| STABILITY | 1 YEAR | 1 YEAR |
English 
Spanish